***Activation Error Codes & Troubleshooting Guides***
Error Code: 0xC004C001
Error Message: The activation server determined the specified product key is invalid
Activation Type: MAK (Multiple Activation Keys)
Possible Cause: An invalid MAK was entered.
Troubleshooting Steps: palit ka na ng key or check mo kung tama ba talaga ginagawa mo...
Error Code: 0xC004C003
Error Message: The activation server determined the specified product key is blocked
Activation Type: MAK (Multiple Activation Keys)
Possible Cause: The MAK is blocked on the activation server.
Troubleshooting Steps: Hanap na ng bagong key
Error Code: 0xC004C008
Error Message: The activation server determined that the specified product key could not be used.
Activation Type: KMS (Key Management System)
Possible Cause: The KMS key has exceeded the activation limit.
Troubleshooting Steps: Hanap na ng bagong server on first page
Error Code: 0xC004C020
Error Message: The activation server reported that the Multiple Activation Key has exceeded its limit.
Activation Type: MAK (Multiple Activation Keys)
Possible Cause: The MAK has exceeded the activation limit.
Troubleshooting Steps: Hanap na ng bagong MAK or switch to Retail Keys. Ask on the Thread
Error Code: 0xC004C021
Error Message: The activation server reported that the Multiple Activation Key extension limit has been exceeded.
Activation Type: MAK (Multiple Activation Keys)
Possible Cause: The MAK has exceeded the activation limit.
Troubleshooting Steps: Hanap na din ng bagong MAK or switch to Retail Keys Ask on the Thread
Error Code: 0xC004F009
Error Message: The Software Protection Service reported that the grace period expired.
Activation Type:MAK (Multiple Activation Keys)
Possible Cause: The grace period expired before the system was activated. Now, the system is in the Notifications state.
Troubleshooting Steps: Hanap na din ng bagong MAK or switch to Retail Keys Ask on the Thread
Error Code: 0xC004F00F
Error Message: The Software Licensing Server reported that the hardware ID binding is beyond level of tolerance.
Activation Type: MAK/KMS client/KMS host
Possible Cause: The hardware has changed or the drivers were updated on the system.
Troubleshooting Steps: MAK: Reactivate the system during the OOT grace period using phone activation. KMS: Restart, or run slmgr.vbs /ato.
Error Code: 0xC004F014
Error Message: The Software Protection Service reported that the product key is not available
Activation Type: MAK/KMS client
Possible Cause: No product keys are installed on the system.
Troubleshooting Steps: Install a MAK product key, or install a KMS Setup key found in \sources\pid.txt on the installation media.
Error Code: 0xC004F02C
Error Message: The Software Protection Service reported that the format for the offline activation data is incorrect.
Activation Type: MAK/KMS client
Possible Cause: The system has detected that the data entered during phone activation is not valid.
Troubleshooting Steps: Verify that the CID is correctly entered. MALI KA NG ENTER NG CONFIRMATION ID... change your keys or find a work around on how to change your installation ID
Error Code: 0xC004F035
Error Message: This error code equates to “The Software Protection Service reported that the computer could not be activated with a Volume license product key...” The error text is correct, but is ambiguous.
This error indicates that the computer is missing a Windows marker in the BIOS – provided on OEM systems to indicate computers shipping with qualifying editions of Windows, which is a requirement for KMS client activation.
Error: Invalid Volume License Key
In order to activate, you need to change your product key to a valid Multiple Activation Key (MAK) or Retail key.
You must have a qualifying operating system license AND a Volume license Windows 7 upgrade license, or a full license for Windows 7 from a retail source.
ANY OTHER INSTALLATION OF THIS SOFTWARE IS IN VIOLATION OF YOUR AGREEMENT AND APPLICABLE COPYRIGHT LAW.
Activation Type: KMS client/KMS host
Possible Cause: Windows 7 Volume editions are licensed for upgrade only. Installing a Volume operating system on a computer that does not have a qualifying operating system installed is not supported.
Troubleshooting Steps: Install a qualifying version of a Microsoft operating system, and then activate by using a MAK.
Error Code: 0xC004F038
Error Message: The Software Protection Service reported that the computer could not be activated. The count reported by your Key Management Service (KMS) is insufficient. Please contact your system administrator.
Activation Type: KMS client
Possible Cause: The count on the KMS host is not high enough. The KMS count must be ≥5 for Windows Server or ≥25 for Windows client.
Troubleshooting Steps: More computers are needed in the KMS pool for KMS clients to activate. Run Slmgr.vbs /dli to get the current count on the KMS host.
Error Code: 0xC004F039
Error Message: The Software Protection Service reported that the computer could not be activated. The Key Management Service (KMS) is not enabled.
Activation Type: KMS client
Possible Cause: This error occurs when a KMS request is not answered.
Troubleshooting Steps: Troubleshoot the network connection between the KMS host and the client. Make sure that TCP port 1688 (default) is not blocked by a firewall or otherwise filtered.
Error Code: 0xC004F041
Error Message: The Software Protection Service determined that the Key Management Server (KMS) is not activated. KMS needs to be activated.
Activation Type: KMS client
Possible Cause: The KMS host is not activated.
Troubleshooting Steps: Hanap ng ibang host on first page
Error Code: 0xC004F042
Error Message: The Software Protection Service determined that the specified Key Management Service (KMS) cannot be used.
Activation Type: KMS client
Possible Cause: Mismatch between the KMS client and the KMS host.
Troubleshooting Steps: This error occurs when a KMS client contacts a KMS host that cannot activate the client software. Hanap na din ng ibang host on first page
Error Code: 0xC004F050
Error Message: The Software Protection Service reported that the product key is invalid.
Activation Type: KMS, KMS client, MAK
Possible Cause: This can be caused by a typo in the KMS key or by typing in a Beta key on a Released version of the operating system.
Troubleshooting Steps: Check maigi ang key na ginamit when installing the product key to be activated by KMS
Error Code: 0xC004F051
Error Message: The Software Protection Service reported that the product key is blocked.
Activation Type: MAK/KMS
Possible Cause: The product key on the activation server is blocked by Microsoft.
Troubleshooting Steps: Obtain a new MAK/KMS key, install it on the system, and activate.
Error Code: 0xC004F064
Error Message: The Software Protection Service reported that the non-genuine grace period expired.
Activation Type: MAK
Possible Cause: Windows Activation Tools (WAT) has determined the system is not genuine.
Troubleshooting Steps: Palit ng bagong key Ask on the Thread
Error Code: 0xC004F065
Error Message: The Software Protection Service reported that the application is running within the valid non-genuine period.
Activation Type: MAK/KMS client
Possible Cause: Windows Activation Tools has determined that the system is not genuine. The system will continue to run during the Non-Genuine grace period.
Troubleshooting Steps: Obtain and install a genuine product key, and activate the system during the grace period. Otherwise, the system will go into the Notifications state at the end of the grace period. Ask on the Thread
Error Code: 0xC004F06C
Error Message: The Software Protection Service reported that the computer could not be activated. The Key Management Service (KMS) determined that the request timestamp is invalid.
Activation Type: KMS client
Possible Cause: The system time on the client computer is too different from the time on the KMS host.
Troubleshooting Steps: Time sync is important to system and network security for a variety of reasons. Fix this issue by changing the system time on the client to sync with the KMS. Use of a Network Time Protocol (NTP) time source or Active Directory Domain Services for time synchronization is recommended. This issue uses UTP time and is independent of Time Zone selection. >>>follow this thread
Error Code: 0x80070005
Error Message: Access denied. The requested action requires elevated privileges.
Activation Type: KMS client/MAK/KMS host
Possible Cause: User Account Control (UAC) prohibits activation processes from running in a non-elevated command prompt.
Troubleshooting Steps: Run slmgr.vbs from an elevated command prompt. Right-click cmd.exe, and then click Run as Administrator. HIT WINDOWS KEY + X HIT "A" then select "yes"
Error Code: 0x8007232A
Error Message: DNS server failure.
Activation Type: KMS host
Possible Cause: The system has network or DNS issues.
Troubleshooting Steps: Troubleshoot network and DNS.
Error Code: 0x8007232B
Error Message: DNS name does not exist.
Activation Type: KMS client
Possible Cause: The KMS client cannot find KMS SRV RRs in DNS.
If a KMS host does not exist on the network, a MAK should be installed.
Troubleshooting Steps: Confirm that a KMS host has been installed and DNS publishing is enabled (default).
If DNS is unavailable, point the KMS client to the KMS host by using slmgr.vbs /skms <kms_host_name>.
Optionally, obtain and install a MAK; then, activate the system.
Finally, troubleshoot DNS. read a work around of KMS on first page
Error Code: 0x800706BA
Error Message: The RPC server is unavailable.
Activation Type: KMS client
Possible Cause: Firewall settings are not configured on the KMS host, or DNS SRV records are stale.
Troubleshooting Steps: Ensure the Key Management Service firewall exception is enabled on the KMS host machine.
Ensure that SRV records point to a valid KMS host.
Troubleshoot network connections. read a work around of KMS on first page
Error Code: 0x8007251D
Error Message: No records found for DNS query.
Activation Type: KMS client
Possible Cause: The KMS client cannot find KMS SRV RRs in DNS.
Troubleshooting Steps: Troubleshoot network connections and DNS. [UR="http://www.symbianize.com/showthread.php?t=1081397&p=18444090&viewfull=1#pos t18444090"L]read a work around of KMS on first page[/URL]
Error Code: 0xC004F074
Error Message: The Software Protection Service reported that the computer could not be activated. No Key Management Service (KMS) could be contacted. Please see the Application Event Log for additional information.
Activation Type: KMS Client
Possible Cause: All KMS host systems returned an error.
Troubleshooting Steps: Troubleshoot errors from each event ID 12288 associated with the activation attempt. read a work around of KMS on first page
No comments:
Post a Comment